-
AIR LIFT 25804 Air Shock Controller Kit
AIR LIFT Air Shock Controller Kit is designed to control the air shock pressure. It includes rugged on board air compressor and dash mount gauge panel as well as hardware. This kit facilitates easy and quick installation.
The Air Lift 25804 Air Shock Controller Kit provides an easy and effective way for drivers to monitor and maintain the air pressure in their air shocks with the push of a dashboard button. Operating without the need for an air tank or a connection to your car battery, the 25804 Air Shock Controller Kit consists of a dashboard mountable pressure gauge, a rugged but ultra compact air compressor and all the air line, mounting hardware and electrical connections needed for quick, easy do-it-yourself installation.
Perfect Push-Button Air Shock Pressurization
Air shocks are designed to be adjusted to ease your ride, as well as raise your vehicle chassis to a higher position when it is heavily loaded or requires additional ground clearance, but they are not always able to be conveniently adjusted. The Air Lift 25804 Air Shock Controller Kit changes that.
A compact air management system specifically designed to pressurize and depressurize your vehicle’s already installed air shocks, right from the dashboard, the Air Lift 25804 Air Shock Controller Kit consists of a small, but durable air compressor that is connected at one end to a pressure gauge at the dashboard and at the other, to your air shocks (T-fitting not included). The compressor is powerful enough to pressurize your shocks without the need for an air tank and is conveniently powered via a connection to your vehicle’s 15-amp minimum fuse box, usually located below the dashboard. Around the dashboard is also where the unit’s single needle pressure gauge is best located, using the included self-tapping screws. In addition to registering pressures up to 200 psi,* this gauge also features an easy-to-use on/off switch and a one-touch deflate button to lower your vehicle just as easy as it is raised. The kit also contains all necessary mounting hardware, a generous length of air line and instruction manual.
Features
- Allows driver control for air shock pressure right from the driver seat
- Includes rugged on board air compressor
- Utilizes a universal connector suitable for most air shocks including those factory installed
- Option to control four air springs in pairs from one compressor
- Includes dash mount gauge panel, hardware and a generous length of air line
- Easy to install and powered via a connection to your vehicle’s fuse box
$183.99 -
Timbren DR1500DS Suspension Enhancement System
Suspension Rubber Helper Spring KitSuspension Enhancement SystemSuspension Enhancement System; Weight Capacity 6000 lbs.; Rear;SPECIFICATIONS:Usage: Medium Duty TruckPosition: RearAxle Style: NAFEATURES:Eliminate Suspension Sag And Cushion Road ShockReduce Sway And Improve Roll StabilityEasy To Install With Basic Hand ToolsImproves Roll ControlTrouble And Maintenance FreeSatisfaction Guarantee And Lifetime WarrantyLeader In The Snow Plow IndustryLeaders In Rubber Spring Technology Since 1965Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.Timbren Industries is a dynamic corporation producing Aeon(R) Hollow Rubber Springs. Since 1968, we’ve been producing quality ride control products and suspensions. Utilizing the latest technology, Timbren uses computer-assisted design and manufacturing processes to produce quality ride control products for today’s market. Timbren is registered ISO9001:2000. These ISO standards ensure that consumers will always receive quality products from Timbren. Our core product, the Aeon(R) Hollow Rubber Spring, is world-renowned for an efficient, reliable suspension system. Many manufacturers, including Bombardier, Mack and Kenworth, directly utilize Timbren kits in their commercial products.
$249.99 -
Timbren DR1500DQ Suspension Enhancement System
Suspension Rubber Helper Spring KitSuspension Enhancement SystemSuspension Enhancement System; Weight Capacity 8600 lbs.; Rear;SPECIFICATIONS:Position: RearAxle Style: NAFEATURES:Eliminate Suspension Sag And Cushion Road ShockReduce Sway And Improve Roll StabilityEasy To Install With Basic Hand ToolsImproves Roll ControlTrouble And Maintenance FreeSatisfaction Guarantee And Lifetime WarrantyUsed To Carry Heavy Cargo Or Towing TrailersLeaders In Rubber Spring Technology Since 1965Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.Timbren Industries is a dynamic corporation producing Aeon(R) Hollow Rubber Springs. Since 1968, we’ve been producing quality ride control products and suspensions. Utilizing the latest technology, Timbren uses computer-assisted design and manufacturing processes to produce quality ride control products for today’s market. Timbren is registered ISO9001:2000. These ISO standards ensure that consumers will always receive quality products from Timbren. Our core product, the Aeon(R) Hollow Rubber Spring, is world-renowned for an efficient, reliable suspension system. Many manufacturers, including Bombardier, Mack and Kenworth, directly utilize Timbren kits in their commercial products. Many other fleets, modifiers and converters install the Aeon(R) sp
$252.45 -
Timbren GMRCK15S Suspension Enhancement System
Suspension Rubber Helper Spring KitSuspension Enhancement SystemSuspension Enhancement System; Weight Capacity 8600 lbs.; Rear;SPECIFICATIONS:Usage: Medium Duty TruckPosition: RearAxle Style: NAFEATURES:Eliminate Suspension Sag And Cushion Road ShockReduce Sway And Improve Roll StabilityEasy To Install With Basic Hand ToolsImproves Roll ControlTrouble And Maintenance FreeSatisfaction Guarantee And Lifetime WarrantyLeader In The Snow Plow IndustryLeaders In Rubber Spring Technology Since 1965Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.Timbren Industries is a dynamic corporation producing Aeon(R) Hollow Rubber Springs. Since 1968, we’ve been producing quality ride control products and suspensions. Utilizing the latest technology, Timbren uses computer-assisted design and manufacturing processes to produce quality ride control products for today’s market. Timbren is registered ISO9001:2000. These ISO standards ensure that consumers will always receive quality products from Timbren. Our core product, the Aeon(R) Hollow Rubber Spring, is world-renowned for an efficient, reliable suspension system. Many manufacturers, including Bombardier, Mack and Kenworth, directly utilize Timbren kits in their commercial products. Many other fleets, modifiers and converters install th
$252.45